Used for pipe and bar defect detection, thickness measurement and diameter measurement
Ultrasonic testing equipment
Used for pipe and bar defect detection, thickness measurement and diameter measurement
Ultrasonic testing equipment
A single instrument can contain up to 32 separate detection channels.
Larger gain range, smaller adjustment steps, and better vertical linearity.
Each channel can be configured for defect detection, stratification, or thickness measurement.
Adjustable pulse trigger sequence to avoid cross-talk in multi-channel applications ? Four independent defect gates per channel for smaller regulatory steps.
15 range amplitude curve (DAC).
Better DAC interface and resolution ? Improved thickness measurement accuracy.
Each channel can be set to pulse echo mode or transmission mode.
Pulse generator
| Pulse type | Negative square wave pulse |
| Pulse voltage | 500 ohm damped maximum voltage 225 Vp, (0 to 100% adjustable, 1% step) |
| Pulse width | 30 to 500 ns (adjustable step 5 ns) |
| damping | 50 to 350 ohms (adjustable step 20 ohms) |
Rise time | 10 ns or less |
| PRF | 10Hz to 15 kHz (adjustable step 10Hz) |
| Pulse delay | 1 to 1000 μs (adjustable step 1 μs) |
| Operation mode | Pulse-echo or transmission mode |
Test carbon steel, duplex stainless steel, stainless steel, aluminum, titanium, copper and other metals and alloys;
Detect defects, measure dimensions and wall thickness;
Detect defects and inclusions in pipes and rods;
Test the ellipticity and eccentricity of the pipe;
Inspect the strip before the welding of the welded pipe;
Upgrade and/or replace older ultrasonic inspection equipment and systems;
It is used in conjunction with ultrasonic rotating body, rotating pipe, water jet and immersion testing system.
